Kisan Group

HDPE Pipes

Kisan HDPE Pipes are extremely useful in Water Supply, Bore Well, Sprinkler, Lift Irrigation, Drip Irrigation, Pesticide Dispersal, Cable Ducting, Sewerage/Drainage, Natural & other gases etc, in urban and rural areas.They are also useful- for conveyance & flow applications in Chemical/Processing Industries, Telecommunications, Vegetable Oils, Fruit Juices, Dairies and other liquids & semi-liquids including Acids, Alkalis & other corrosive chemicals.

Our current range of HDPE pipes are available in sizes 20 to 630mm OD pressure rating from PN-2.5 to PN-16.5 conforming to IS 4984:1995 & IS 14333:1996 as per required application. We also supply the requisite HDPE fittings.

Chemical / Processing Industries :
Not affected by acid and alkali
Water Supply :
Smooth continuous flow of water due to smooth inner surface
Gas Distribution :
For carrying Natural Gas, Coal Gas, Bio - Gas etc. for domestic and industrial purpose
Drainage & Sewerage :
For carrying Soil, Waiste from the SWR Drainage System to appropriate drains or sewers through an underground network of pipes

Corrosion Resistant :
HDPE pipes do not rust rot or corrode. HDPE is one of the most chemically inert of all plastics and therefore is extremely chemical and corrosion resistant.
Combination of Strength & Flexibility :
HDPE has low notch sensitivity and high tear strength At the same time, being flexible, HDPE performs well in both high cover and low cover applica tions. It's unique ability to support and distribute live and dead load enables it to meet almost every installation conditions.
Installation Ease :
Holding and installation cost is considerably reduced due to light weight feature while long lengths reduces jointing and fitting cost for e.g. Sizes upto 110mm pipe is available in coil form of 250-500 metres. Coil lengths can be increased incase of sizes from 20mm to 50mm OD.
Chemical & Abrasion Resistant :
HDPE is one of the most chemically inert of all plastics and with high resistance to abrasion. These two characteristics give HDPE pipe a significant long term advantage.
UV Resistan :
Black HDPE contains approx. 2.5% ± 0.5% carbon black and can be safely stored and installed in non - covered areas.
Easy Joining :
HDPE could be joined both mechanically by Flange Joint or Butt Welding method at site with HDPE Couplers/Sockets.
Pressure Rating :
HDPE pipes are available in a range of pressure ratings from PN 2.5-4-6-8 10-12.5 and 16 (PN stands for Kgf/cm2).

Butt Fusion Welding is a time saving, highly economical, simple and widely accepted reliable method of jointing HDPE pipes. It is a permanent jointing method by homogenous fusion of pipe material under heat and pressure. It is performed within the temperature range of fusion of HDPE material. Perfectly homogenous pipe joints have same properties as the pipe and fitting and are as strong as the parent pipe and can resist longitudinal load.

Small sizes, from 20 mm to 110 mm HDPE pipes, are joined by Heating Mirrors of 220 volts and are manually done without using any jacks. However, for sizes above 110 mm upto 250 mm, Mechanical Jacks are used to ensure proper pressure and alignment while fusing the two pipes. For sizes above 250 mm, Hydraulic Jacks make the job simpler and reliable by exerting correct pressure and alignment, resulting in a perfect joint.


Mechanical Jack	Hydraulic Jack

KML C lassic CPVC Plumbing Pipes & Fittings as per IS: 15778
Kisan Composite Piping System as per IS:15450
Kisan PVC SW R Pipes & Fittings as per IS: 13592 & IS: 14735
Kisan Free Flow UPVC Plumbing Pipes & Fittings as per ASTM specifications
Kisan Barish Rain Water Harvesting Systems
Kisan uPVC Pipes & Fittings as per IS:4985, IS: 7834 & IS: 10124
Kisan uPVC Casing Pipes as per IS:12818
Kisan uPVC Submersible Rising Main Pipes
Kisan HDPE Sprinkler & Drip Irrigation System as Per IS: 14151, IS:13488, IS: 13487 & IS: 12786
Kisan HDPE PLB Cable Duct Pipes as per DOT Specification GR/CDS - 08/02 Nov. 2004
Kisan PVC Ball Valves & Foot Valves
Kisan Flushing Cisterns as per IS:7231 & Seat Covers
Kisan uPVC Cable Ducting Pipes
Kisan PVC-U Underground Drainage & Sewerage Pipes as per IS: 15328
Kisan Circle Ark Conduit Pipes & Fittings as per IS:9537
Kisan Flexible PVC Hose Pipes for Suction & Delivery.
Kisan PVC Solvent Cement as per IS:14182 & Rubber Lubricants
Kisan Crest Moulded Furniture
Kisan Classic Ghamelas

Specifications

Property	Test Method	Unit	Typical Value
TYPICAL CHARACTERISITICS OF HIGH DENSITY POLYETHYLEHE(PIPE GRADE)
Melt Flow Index(190 deg.C/5.0 Kg)	ASTM D1238	Gm/10min	0.30
Density(23 deg.C)	ASTM D1505	Gm/cm²	0.946
Thermal Stability(O.I.T.) 200deg.C	ASTM D3895	Min	>30
Tensile Strength at Yield	ASTM D 638	Mpa	28
Elongation at Break	ASTM D 638	%	>600
Flexural Modulus	ASTM D 790	Mpa	850
Notched izod impact strength	ASTM D 256	J/M	No Break
ESCR	ASTM D 1693	Hours	>1000
Coefficient of linear expansion	-	Mm/mc	0.2

DN	PN 2.5		PN 4		PN 6		PN 8		PN 10		PN 12.5		PN 16
Nominal Dia				Wall Thickness as per IS 4984 PE 63 Grade
	Min	Max	Min	Max	Min	Max	Min	Max	Min	Max	Min	Max	Min	Max
20	-	-	-	-	-	-	-	-	2.3	2.8	2.8	3.3	3.4	4.0
25	-	-	-	-	-	-	2.3	2.8	2.8	3.3	3.4	4.0	4.2	4.9
32	-	-	-	-	2.3	2.8	3.0	3.5	3.6	4.2	4.4	5.1	5.4	6.2
40	-	-	2.0	2.4	2.8	3.3	3.7	4.3	4.5	5.2	5.5	6.3	6.7	7.6
50	-	-	2.4	2.9	3.5	4.1	4.6	5.3	5.6	6.4	6.8	7.7	8.4	9.5
63	2.0	2.4	3.0	3.5	4.4	5.1	5.8	6.6	7.0	7.9	8.6	9.7	10.5	11.8
75	2.3	2.8	3.6	4.2	5.3	6.1	6.9	7.8	8.4	9.5	10.2	11.5	12.5	14.0
90	2.8	3.3	4.3	5.0	6.3	7.2	8.2	9.3	10.0	11.2	12.2	13.7	15.0	16.7
110	3.4	4.0	5.3	6.1	7.7	8.7	10.0	11.2	12.3	13.8	14.9	16.6	18.4	20.5
125	3.8	4.4	6.0	6.8	8.8	9.9	11.4	12.8	13.9	15.5	16.9	18.8	20.9	23.2
140	4.3	5.0	6.7	7.6	9.8	11.0	12.8	14.3	15.6	17.4	19.0	21.1	23.4	26.0
160	4.9	5.6	7.7	8.7	11.2	12.6	14.6	16.3	17.8	19.8	21.7	24.1	26.7	29.6
180	5.5	6.3	8.6	9.7	12.6	14.1	16.4	18.3	20.0	22.2	24.4	27.1	30.0	33.2
200	6.1	7.0	9.6	10.8	14.0	15.6	18.2	20.3	22.3	24.8	27.1	30.1	33.4	37.0
225	6.9	7.8	10.8	12.1	17.5	20.5	22.8	17.5	25.0	27.7	30.8	33.8	37.5	41.5
250	7.6	8.6	12.0	13.4	19.5	19.5	22.8	25.3	27.8	30.8	33.8	37.4	41.7	46.1
280	8.5	9.6	13.4	15.0	19.6	21.8	25.5	28.3	31.2	34.6	37.9	41.9	46.7	51.6
315	9.6	10.8	15.0	16.7	22.0	24.4	28.7	31.8	35.0	38.7	42.6	47.1	52.5	58.0
355	10.8	12.1	17.0	18.9	24.8	27.5	32.3	35.8	39.5	43.7	48.0	53.0	59.2	65.4
400	12.2	14.3	19.1	22.2	28.0	32.4	36.4	42.1	44.5	51.4	54.1	62.5	-	-
450	13.7	16.0	21.5	25.0	31.4	36.4	41.0	47.4	50.0	57.7	-	-	-	-
500	15.2	17.7	23.9	27.7	34.9	40.4	45.5	52.6	55.6	64.2	-	-	-	-
560	17.0	19.8	26.7	31.0	39.1	45.2	51.0	58.9	-	-	-	-	-	-
630	19.1	22.2	30.0	34.7	44.0	50.8	57.3	66.1	-	-	-	-	-	-

OD	PN 2.5		PN 4		PN 6		PN 8		PN 10		PN 12.5		PN 16
(mm)					Wall Thickness as per IS 4984 PE 80 Grade
	Min	Max	Min	Max	Min	Max	Min	Max	Min	Max	Min	Max	Min	Max
20	0	0	0	0	0	0	0	0	0	0	2.3	2.8	2.8	3.3
25	0	0	0	0	0	0	0	0	2.3	2.8	2.8	3.3	3.5	4.1
32	0	0	0	0	0	0	2.4	2.9	3.0	3.5	3.6	4.2	4.5	5.2
40	0	0	0	0	2.3	2.8	3.0	3.5	3.7	4.3	4.5	5.2	5.6	6.4
50	0	0	2.3	2.8	2.9	3.4	3.8	4.4	4.6	5.3	5.6	6.4	6.9	7.8
63	0	0	2.5	3.2	3.6	4.2	4.7	5.4	5.8	6.6	7.8	7.0	8.7	9.8
75	0	0	2.9	3.4	4.3	5.0	5.6	6.4	6.9	7.8	8.4	9.5	10.4	11.7
90	2.3	2.8	3.5	4.1	5.1	5.9	6.7	7.6	8.2	9.3	10.0	11.2	12.5	14.0
110	2.7	3.2	4.3	5.0	6.3	7.2	8.2	9.3	10.0	11.2	12.3	13.8	15.2	17.0
125	3.1	3.7	4.9	5.6	7.1	8.1	9.3	10.5	11.4	12.8	13.9	15.5	17.3	19.3
140	3.5	4.1	5.4	6.2	8.0	9.0	10.4	11.7	12.8	14.3	15.6	17.4	19.4	21.6
160	4.0	4.6	6.2	7.1	9.1	10.3	11.9	13.3	14.6	16.3	17.8	19.8	22.1	24.6
180	4.4	5.1	7.0	7.9	10.2	11.5	13.4	15.0	16.4	18.3	20.0	22.2	24.9	27.6
200	4.9	5.6	7.7	8.7	11.4	12.8	14.9	16.6	18.2	20.3	22.3	24.8	27.6	30.6
225	5.5	6.3	8.7	9.8	12.8	14.3	16.7	18.6	20.5	22.8	25.0	27.7	31.1	34.5
250	6.1	7.0	9.7	10.9	14.2	15.9	18.6	20.7	22.8	25.3	27.8	30.8	34.5	38.2
280	6.9	7.8	10.8	12.1	15.9	17.7	20.8	23.1	25.5	28.3	31.2	34.6	38.7	42.8
315	7.7	8.7	12.2	13.7	17.9	19.9	23.4	26.0	28.7	31.8	35.0	38.7	43.5	48.1
355	8.7	9.8	13.7	15.3	20.1	22.4	26.3	29.2	32.3	35.8	39.5	43.7	49.0	54.1
400	9.8	11.5	15.4	18.0	22.7	26.4	29.7	34.4	36.4	42.1	44.5	51.4	55.2	63.7
450	11.0	12.9	17.4	20.3	25.5	29.6	33.4	38.7	41.0	47.4	50.0	57.7	-	-
500	12.2	14.3	19.3	22.4	28.4	32.9	37.1	42.9	45.5	52.6	55.6	64.2	-	-
560	13.7	16.0	21.6	25.1	31.7	36.7	41.5	48.0	51.0	58.9	-	-	-	-
630	15.4	18.0	24.3	28.2	35.7	41.3	46.7	54.0	57.3	66.1	-	-	-	-

OD	PN 6		PN 8		PN 10		PN 12.5		PN 16
(mm)	Wall Thickness as per IS 4984 PE 100 Grade
	Min	Max	Min	Max	Min	Max	Min	Max	Min	Max
20	-	-	-	-	-	-	-	-	2.3	2.8
25	-	-	-	-	-	-	2.3	2.8	2.9	3.4
32	-	-	-	-	2.4	2.9	2.9	3.4	3.7	4.3
40	-	-	2.4	2.9	3.0	3.5	3.7	4.3	4.6	5.3
50	2.3	2.8	3.0	3.5	3.7	4.3	4.6	5.3	5.7	6.5
63	2.9	3.4	3.8	4.4	4.7	5.4	5.7	6.5	7.1	8.1
75	3.5	4.1	4.5	5.2	5.6	6.4	6.8	7.7	8.5	9.6
90	4.1	4.8	5.4	6.2	6.7	7.6	8.2	9.3	10.2	11.5
110	5.0	5.7	6.6	7.5	8.1	9.2	10.0	11.2	12.4	13.9
125	5.7	6.5	7.5	8.5	9.2	10.4	11.3	12.7	14.1	15.8
140	6.4	7.3	8.4	9.5	10.3	11.6	12.7	14.2	15.8	17.6
160	7.3	8.3	9.6	10.8	11.8	13.2	14.5	16.2	18.1	20.2
180	8.2	9.3	10.8	12.1	13.3	14.9	16.3	18.2	20.3	22.6
200	9.1	10.3	12.0	13.4	14.8	16.5	18.1	20.2	22.6	25.1
225	10.3	11.6	13.5	15.1	16.6	18.5	20.4	22.7	25.4	28.2
250	11.4	12.8	15.0	16.7	18.4	20.5	22.6	25.1	28.2	31.3
280	12.8	14.3	16.8	18.7	20.6	22.9	25.3	28.1	31.6	35.0
315	14.4	16.1	18.9	21.0	23.2	25.8	28.5	31.6	35.5	39.3
355	16.2	18.1	21.2	23.6	26.2	29.1	32.1	35.6	40.0	44.2
400	18.2	21.2	23.9	27.7	29.5	34.2	36.2	41.9	45.1	52.
450	20.5	23.8	26.9	31.2	33.1	38.3	40.7	47.1	50.8	58.7
500	22.8	26.5	29.9	34.6	36.8	42.6	45.2	52.2	56.4	65.1
560	25.5	29.6	33.5	38.8	41.2	47.6	50.6	58.4	-	-
630	28.7	33.3	37.7	43.6	46.4	53.6	56.9	65.7	-	-

OD	PN2.5		PN4		PN6		PN8			PN10		PN12.5		PN16
(mm)					Wall Thickness as per IS 14333 PE 63 Grade
	Min	Max	Min	Max	Min	Max		Min	Max	Min	Max	Min	Max	Min	Max
63	-	-	4.0	4.6	5.8	6.6		7.5	8.5	9.0	17.60	10.9	12.2	13.3	14.9
75	3.0	3.5	4.7	5.4	6.9	7.8		8.9	10.0	10.8	19.90	13.0	14.5	15.8	17.6
90	3.6	4.2	5.7	6.5	8.2	9.3		10.6	11.9	12.9	22.20	15.6	17.4	19.0	21.1
110	4.40	5.10	6.90	7.80	10.00	11.20		13.00	14.50	15.80	25.40	19.00	21.10	23.20	25.80
125	5.00	5.70	7.90	8.90	11.40	12.80		14.80	16.50	17.90	28.60	21.60	24.40	26.40	29.30
140	5.60	6.40	8.80	9.90	12.80	14.30		16.50	18.40	20.00	31.70	24.20	26.90	29.50	32.70
160	6.40	7.30	10.00	11.20	14.60	16.30		18.90	21.00	22.90	39.60	27.60	30.60	33.70	37.30
180	7.20	8.20	11.30	12.70	16.40	18.30		21.20	23.60	25.80	44.20	31.10	34.50	37.90	41.90
200	8.00	9.00	12.50	14.00	18.20	20.30		23.60	26.20	28.60	49.70	34.50	38.20	42.20	46.70
225	9.00	10.10	14.10	15.80	20.50	22.80		26.50	29.40	32.20	56.10	38.80	42.90	47.40	52.40
250	10.00	11.20	15.70	17.50	22.80	25.30		29.50	32.70	35.80	66.00	43.20	47.80	52.70	58.20
280	11.20	12.60	17.50	19.50	25.50	28.30		33.00	36.50	40.00	-	48.30	53.40	-	-
315	12.60	14.10	19.70	21.90	28.70	31.80		37.10	41.10	45.00	-	54.40	60.10	-	-
355	14.20	15.90	22.20	24.70	32.30	35.80		41.80	46.20	50.80	-	-	-	-	-
400	16.00	18.60	25.00	29.00	36.40	42.10		47.10	54.40	57.20	-	-	-	-	-
450	18.00	20.9	28.20	32.70	41.00	47.40		53.00	61.20	-	-	-	-	-	-
500	20.00	23.20	31.30	36.20	45.50	52.60		-	-	-		-	-	-	-
560	22.40	26.00	35.00	40.50	51.00	58.90		-	-	-		-	-	-	-
630	25.20	29.20	39.40	45.60	57.30	66.10		-	-	-		-	-	-	-

PN2.5

PN4

PN6

PN8

PN10

PN12.5

PN16

(mm)

Wall Thickness as per IS 14333 PE 80 Grade

Min

Max

Min

Max

Min

Max

Min

Max

Min

Max

Min

Max

Min

Max

110

3.40

4.00

5.30

6.10

7.70

8.70

11.20

12.30

13.80

14.90

16.60

18.40

20.50

125

3.80

4.40

6.00

6.80

8.80

9.90

11.40

12.80

13.90

15.50

16.90

18.80

20.90

23.20

140

4.30

5.00

6.70

7.60

9.80

11.00

12.80

14.30

15.60

17.40

19.00

21.10

23.40

26.00

160

4.90

5.60

7.70

8.70

11.20

12.60

14.60

16.30

17.80

19.80

21.70

24.10

26.70

29.60

180

5.50

6.30

8060

9.70

12.60

14.10

16.40

18.30

20.00

22.20

24.40

27.10

30.00

33.20

200

6.10

7.00

9.60

10.80

14.00

15.60

18.20

20.30

22.30

24.80

27.10

30.10

33.40

37.00

225

6.90

7.80

10.80

12.10

15.70

17.50

20.50

22.80

25.00

27.70

30.50

33.80

37.50

41.50

250

7.60

8.60

12.00

13.40

17.50

19.50

22.80

25.30

27.80

30.80

33.80

37.40

41.70

46.10

280

8.50

9.60

13.40

15.00

19.60

21.80

25.50

28.30

31.20

34.60

37.90

41.90

46.70

51.60

315

9.60

10.80

15.00

16.70

22.00

24.40

28.70

31.80

35.00

38.70

42.60

47.10

52.50

58.00

355

10.80

12.10

17.00

18.90

24.80

27.50

32.30

35.80

39.50

43.70

48.00

53.00

59.20

65.40

400

12.20

14.30

19.10

22.20

28.00

32.40

36.40

42.10

44.50

51.40

54.10

62.50

450

13.70

16.00

21.50

25.00

31.40

36.40

41.00

47.40

50.00

57.70

500

15.20

17.70

23.90

27.70

34.90

40.40

45.50

52.60

55.60

64.20

560

17.00

19.80

26.70

31.00

39.10

45.20

51.00

58.90

630

19.10

22.20

30.00

34.70

44.00

50.80

57.30

66.10

OD	PN 6		PN 8		PN 10		PN 12.5		PN 16
(mm)	Wall Thickness as per IS 4984 PE 100 Grade
	Min	Max	Min	Max	Min	Max	Min	Max	Min	Max
63	3.6	4.2	4.7	5.4	5.8	6.6	7.0	7.9	8.7	9.8
75	4.3	5.0	5.6	6.4	6.9	7.8	8.4	9.5	10.4	11.7
90	5.1	5.9	6.7	7.6	8.2	9.3	10.0	11.2	12.5	14.0
110	6.3	7.2	8.2	9.3	10.0	11.2	12.3	13.8	15.2	17.0
125	7.1	8.1	9.3	105	11.4	12.8	13.9	15.5	17.3	19.3
140	8.0	9.0	10.4	11.7	12.8	14.3	15.6	17.3	19.4	21.6
160	9.1	10.3	11.9	13.3	14.6	16.3	17.8	19.4	22.1	24.6
180	10.2	11.5	13.4	15.0	16.4	18.3	20.0	22.1	24.9	27.6
200	11.4	12.8	14.9	16.6	18.2	20.3	22.3	24.9	27.6	30.6
225	12.8	14.3	16.7	18.6	20.5	22.3	25.0	27.6	31.1	34.5
250	14.2	15.9	18.6	20.7	22.8	25.0	27.8	31.1	34.5	38.2
280	15.9	17.7	20.8	23.1	25.2	28.3	31.2	34.5	38.7	42.8
315	17.9	19.9	23.4	26.0	28.7	31.2	25.0	38.7	43.5	48.1
355	20.1	22.4	26.3	29.2	32.3	35.0	39.5	43.5	49.0	54.1
400	22.7	26.4	29.7	34.4	36.4	42.1	44.5	49.0	55.2	63.7
450	25.5	29.6	33.4	38.7	41.0	47.4	50.0	55.2	-	-
500	28.4	32.9	37.1	42.9	45.5	52.6	55.6	-	-	-
560	31.7	36.7	41.5	48.0	51.0	58.9	-	-	-	-
630	35.7	41.3	46.7	54.0	57.3	66.1	-	-	-	-

HDPE Fittings

Moulded Fittings are available in sizes upto 160mm & Fabricated Fittings are available in sizes 180mm to 630 mm.